CCIE R & S Ver5

Course Description

The Entire New CCIE v5 Exam is on Virtual Gear and no Actual Devices are used for any Section. However For Training purpose we will be using both the Actual Rack and virtual racks.

CCIE Certification is the Highest Level of Certification Offered By Cisco System inc. CCIE Routing & Switching Track is the Oldest and the Most Popular CCIE Track Horizon Computers Focus on Ensuring that Candidates Develop True Expert Level Skills in Core Routing & Switching Technologies.

All The Topics In CCIE Routing & Switching Track will be Covered In-Depth as Our Aim is to not Just Produce Certified Candidates bur True Experts.

Ps: We Do not Encourage any Short-cuts or Just Passing the Exam

The following Topics have been added in Version 5:

  • Bidirectional Forwarding Detection (BFD)
  • Multi Address Family (AF) EIGRP
  • Dynamic Multipoint VPN (DMVPN)
  • Interpreting Packet Captures
  • IPSec
  • IPv6 First Hop Security

The following training method is used for End-to-End CCIE program.

Core Routing & Switching:

  • CCNA R&S
  • CCNP R&S
Duration: 140 Hours

Advance CCIE Topics:

  • IPv4 & IPv6 Multicast
  • MPLS and L3VPN
  • QOS
  • Security
  • IPSec VPN and DMVPN
Duration: 100 Hours

Final CCIE 5 Days Full Time Boot Camp:

CCIE R&S Lab Boot Camp Aims to Prepare Candidates for Final Lab Exam Candidates Must be Thoroughly Prepared with all the Topics as Mentionedin the Course Blueprint.

Boot Camp Consists of Multiple Troubleshooting and Configuration labs aimed to Make the Candidate Familiar with Real Lab Exam Focusing on Developing Troubleshooting Strategy Time management and also Testing Candidates with Horizon Computers Own Mock Labs.

CCIE Support Policy:

ALL CCIE Candidates Enrolling in Horizon Computers are Entitled for OneYear Free Support. It Means Unlimited Repeats, Free Practice and Free Access to all CCIE Lab Exam Preparation Material

Horizon Candidates will be eligible for all Horizon Study material including Technology labs, mock Labs etc.

CCIE R & S Ver5 Course Introduction

CCIE R & S Ver5 is available in Horizon Computers Vashi, Vile Parle, Pune
1.0 Network Principles
1.1 Network theory
(1.1.a) Describe basic software architecture differences between IOS and IOS XE
1.1.a (i) Control plane and Forwarding plane
1.1.a (ii) Impact to troubleshooting and performances
1.1.a (iii) Excluding specific platform's architecture
(1.1.b) Identify Cisco express forwarding concepts
1.1.b (i) RIB, FIB, LFIB, Adjacency table
1.1.b (ii) Load balancing Hash
1.1.b (iii) Polarization concept and avoidance
(1.1.c) Explain general network challenges
1.1.c (i) Unicast flooding
1.1.c (ii) Out of order packets
1.1.c (iii) Asymmetric routing
1.1.c (iv) Impact of micro burst
(1.1.d) Explain IP operations
1.1.d (i) ICMP unreachable, redirect
1.1.d (ii) IPv4 options, IPv6 extension headers
1.1.d (iii) IPv4 and IPv6 fragmentation
1.1.d (iv) TTL
1.1.d (v) IP MTU
(1.1.e) Explain TCP operations
1.1.e (i) IPv4 and IPv6 PMTU
1.1.e (ii) MSS 2013 Cisco Systems, Inc. This document is Cisco Public. Page 2
1.1.e (iii) Latency
1.1.e (iv) Windowing
1.1.e (v) Bandwidth delay product
1.1.e (vi) Global synchronization
1.1.e (vii) Options
(1.1.f) Explain UDP operations
1.1.f (i) Starvation
1.1.f (ii) Latency
1.1.f (iii) RTP/RTCP concepts
1.2 Network implementation and operation
(1.2.a)Evaluate proposed changes to a network
1.2.a (i) Changes to routing protocol parameters
1.2.a (ii) Migrate parts of a network to IPv6
1.2.a (iii) Routing protocol migration
1.2.a (iv) Adding multicast support
1.2.a (v) Migrate spanning tree protocol
1.2.a (vi) Evaluate impact of new traffic on existing QoS design
1.3 Network troubleshooting
(1.3.a)Use IOS troubleshooting tools
1.3.a (i) debug, conditional debug
1.3.a (ii) ping, traceroute with extended options
1.3.a (iii) Embedded packet capture
1.3.a (iv) Performance monitor
(1.3.b)Apply troubleshooting methodologies
1.3.a (i) debug, conditional debug
1.3.a (ii) ping, traceroute with extended options
1.3.a (iii) Embedded packet capture
1.3.a (iv) Performance monitor
1.3.b (i) Diagnose the root cause of networking issue (analyze symptoms, identify and describe root cause)
1.3.b (ii) Design and implement valid solutions according to constraints
1.3.b (iii) Verify and monitor resolution
1.3.c (i) Using Wireshark trace analyzer
1.3.c (ii) Using IOS embedded packet capture
2.0 Layer 2 Technologies
2.1 LAN switching technologies
(2.1.a) Implement and troubleshoot switch administration
2.1.a (i) Managing MAC address table
2.1.a (ii) errdisable recovery
2.1.a (iii) L2 MTU
(2.1.b) Implement and troubleshoot layer 2 protocols
2.1.b (i) CDP, LLDP
2.1.b (ii) UDLD

For detailed Brochure of CCIE R & S Ver5 please click the below button