CCIE Routing and Switching V5 is available in Horizon Computers Vashi, Vile Parle, Pune |
1.0 | Network Principles |
1.1 | Network theory |
|
(1.1.a) Describe basic software architecture differences between IOS and IOS XE
|
|
1.1.a (i) Control plane and Forwarding plane
1.1.a (ii) Impact to troubleshooting and performances
1.1.a (iii) Excluding specific platform's architecture
|
|
(1.1.b) Identify Cisco express forwarding concepts
|
|
1.1.b (i) RIB, FIB, LFIB, Adjacency table
1.1.b (ii) Load balancing Hash
1.1.b (iii) Polarization concept and avoidance
|
|
(1.1.c) Explain general network challenges
|
|
1.1.c (i) Unicast flooding
1.1.c (ii) Out of order packets
1.1.c (iii) Asymmetric routing
1.1.c (iv) Impact of micro burst
|
|
(1.1.d) Explain IP operations
|
|
1.1.d (i) ICMP unreachable, redirect
1.1.d (ii) IPv4 options, IPv6 extension headers
1.1.d (iii) IPv4 and IPv6 fragmentation
1.1.d (iv) TTL
1.1.d (v) IP MTU
|
|
(1.1.e) Explain TCP operations
|
|
1.1.e (i) IPv4 and IPv6 PMTU
1.1.e (ii) MSS 2013 Cisco Systems, Inc. This document is Cisco Public. Page 2
1.1.e (iii) Latency
1.1.e (iv) Windowing
1.1.e (v) Bandwidth delay product
1.1.e (vi) Global synchronization
1.1.e (vii) Options
|
|
(1.1.f) Explain UDP operations
|
|
1.1.f (i) Starvation
1.1.f (ii) Latency
1.1.f (iii) RTP/RTCP concepts
|
1.2 | Network implementation and operation |
|
(1.2.a)Evaluate proposed changes to a network
|
|
1.2.a (i) Changes to routing protocol parameters
1.2.a (ii) Migrate parts of a network to IPv6
1.2.a (iii) Routing protocol migration
1.2.a (iv) Adding multicast support
1.2.a (v) Migrate spanning tree protocol
1.2.a (vi) Evaluate impact of new traffic on existing QoS design
|
1.3 | Network troubleshooting |
|
(1.3.a)Use IOS troubleshooting tools
|
|
1.3.a (i) debug, conditional debug
1.3.a (ii) ping, traceroute with extended options
1.3.a (iii) Embedded packet capture
1.3.a (iv) Performance monitor
|
|
(1.3.b)Apply troubleshooting methodologies
|
|
1.3.a (i) debug, conditional debug
1.3.a (ii) ping, traceroute with extended options
1.3.a (iii) Embedded packet capture
1.3.a (iv) Performance monitor
|
|
1.3.b (i) Diagnose the root cause of networking issue (analyze symptoms, identify and describe root cause)
1.3.b (ii) Design and implement valid solutions according to constraints
1.3.b (iii) Verify and monitor resolution
|
|
1.3.c (i) Using Wireshark trace analyzer
1.3.c (ii) Using IOS embedded packet capture
|
2.0 | Layer 2 Technologies |
2.1 | LAN switching technologies |
|
(2.1.a) Implement and troubleshoot switch administration
|
|
2.1.a (i) Managing MAC address table
2.1.a (ii) errdisable recovery
2.1.a (iii) L2 MTU
|
|
(2.1.b) Implement and troubleshoot layer 2 protocols
|
|
2.1.b (i) CDP, LLDP
2.1.b (ii) UDLD
|